RF-Max Digimax 210 Bedienungsanleitung PDF herunterladen (Seite 28)

6.8.2. REFERENCE

ADDRESS FOR HOME

AUTOMATION

28 MARMITEK

To control various Home Automation modules,

the reference address has to be set on the

SC2800 base station. The address A1 is the

factory default. The A in this address is the House

Code (HC). Under normal circumstances, the

House Code of the base station, remote controls

and Home Automation modules must be on the

same letter code. The 1 in the reference address

is called Unit Code (UC).

The SC2800 base station normally transmits

signals to various addresses to activate e.g. extra

sirens. The functions are preprogrammed into the

base station. An addressing method "with respect

to the reference address of the base station" is

used to achieve these functions. When multiple

Marmitek X-10 Home Automation systems are

placed in the house, it can be necessary to

change the Unit Code of the base station.

4. LIFESTYLE

FUNCTION

Modules will be

switched on and off

to simulate your presence (refer to 6.9).

MARMITEK X-10

MODULE SET TO A3

A4

5. EXTERNAL

SIREN -

UNIVERSAL

This function will

activate an AD10 (Art.No. 08933, separately

available) during an alarm and will be

automatically switched off after 4 minutes.

You now can place multiple sirens without

installing extra cables.

MARMITEK X-10

MODULE SET TO B5

7. OFF WHEN AWAY

Module will be

switched off as soon

as the system is

disarmed. Will often

be used in combination with scenes/macro’s

(wake up, leave, come home, sleep, etc.) of the

Marmitek X-10 CM11 Computer Interface.

For more information ask your dealer or look at

our website: www.mamritek.com

MARMITEK X-10

MODULE SET TO B6

6. EXTERNAL

INDOOR SIREN

PH7208

The Marmitek Siren

works without extra wiring. The commands to

switch the siren on and off are sent through

the existing house wiring (Marmitek X-10

command "all lights on" and "all lights off").

These commands are being placed on the

existing house wiring by the SC2800 base

station. Note: the Siren has to be connected

on the same phase as the alarm console. If

this is not possible you need to use Phase

Coupler/Filter (FD10). To prevent false alarm

the systems waits 20 seconds before

triggering the Siren after activating the Alarm.

The Siren makes a piercing two-tone signal for

4 minutes when activated. After this the Siren

will be automatically switched off (or sooner

when the alarm is switched off). Note: When

you use a Marmitek Alarm System, the Sirens

always work during an alarm, regardless of the

function silent alarm is being switched on.

The PH7208 is designed for indoor use. You

can connect the PH7208 to a standard wall

outlet.

PH7208 SET TO A1

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 34 35 36

Kommentare zu diesen Handbüchern

Keine Kommentare